The IS215UCCAM03A is a Compact PCI Processor Module, manufactured and designed by General Electric as part of Mark VIe Serie used in distributed control systems.
Brand :
GEPart number :
IS215UCCAM03ADescription :
Compact PCI Processor ModuleOrigin :
USACondition :
NewDimension :
38.9 cm x 23.4 cm x 2.3 cmWeight :
0.8 kgPayment :
Bank Transfer
GE IS215UCCAM03A Compact PCI Processor Module
The IS215UCCAM03A is a single-slot board using a 650 MHz Intel® Celeron® processor. A 10Base TX/100Base-TX (RJ-45) Ethernet port provides connectivity to the Unit Data Highway (UDH). There are two PCI Mezzanine Card (PMC) sites and a watchdog timer. The processor board is the compute engine of the Mark VIe controller.
The IS215UCCAM03A is a module assembly that includes the IS215UCCAH3 combined with 128 MB of flash memory, 128 MB of DRAM, and the IS200EPMC.
LEDs and Connections
Technical Specifications
| Item | UCCA Specification |
| Microprocessor | Intel Ultra Low Voltage Celeron 650 MHz (8.3 Watts max) |
| Memory | 128 MB DDR SDRAM through one SODIMM 256 KB L2 cache Flash-backed SRAM - 8K allocated as NVRAM for controller functions |
| Flash | 128 MB ComactFlash module (GE part #336A5196AAP8) |
| Operating System | QNX Neutrino |
| Programming | Control block language with analog and discrete blocks; Boolean logic represented in relay ladder diagram format. Supported data types include: Boolean 16-bit signed integer 16-bit unsigned integer 32-bit signed integer 32-bit unsigned integer 32-bit floating point 64-bit long floating point |
| Primary Ethernet interface (one port) |
TCP/IP protocol for communication between controller and ToolboxSTapplication TCP/IP protocol used for alarm communication to HMIs Ethernet Global Data (EGD) protocol for application variable communication with CIMPLICITY® HMI and Series 90-70 programmable logic controllers (PLCs) Ethernet Modbus® protocol supported for communication between controller and third-party distributed control system (DCS) |
| EPMC Ethernet Interface (three ports) |
Twisted pair 10Base-TX/100Base-TX, RJ-45 connectors: TCP/IP protocols used to communicate between controllers and I/O modules |
| COM ports | Two micro-miniature 9-pin D connectors: COM1 Reserved for diagnostics, 9600 baud, 8 data bits, no parity, 1 stop bit COM2 Not used For cabling, use one of the following: GE-provided Ethernet cables, which are specifically designed for use in the Mark* controller product family (GE part #342A4931ABP1) and a controller connector (GE part #342A4931ABP2), or a miniature D shell, null modem serial cable (GE part #336A3582P1), connected with a micro-miniature pigtail (GE part #336A4929G1) |
| Power requirements | 3.3 V dc, 3.5 A typical, 4.25 A maximum 5 V dc, 150 mA typical, 300 mA maximum |
| † Ambient rating for enclosure design |
0 to 60°C (32 to 140 ºF) |
| Technical Regulations, Standards, and Environments |
† Refer to GEH-6721_Vol_I, the chapter Technical Regulations, Standards, and Environments for additional equipment rating information depending on application requirements. |
100% brand new and original,All the goods will be tested before shipment.
For the in stock items, we will send the order out within 5-7 days after receive the payment.
Global supplier of quality automation and control components.
Topteng offers a 12-month warranty from the date of delivery.
In the event of non-conforming product ( if damaged or incorrect product is received ),
Any nonconformity must be reported within 7 days of receipt of goods.
Questions? Call +86 18050017653 or Email sales4@nseauto.com
Really a nice experience when you can find something new and get a great price! Will definitely buy again.
Very good seller products same as described in very good packing and short delivery time.
Very quick response to my quote requests and product ships out fast.
The quality of the product exceeded my expectations.
The customer support was outstanding.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Social Info
WhatsApp : +8618050017653
Network Supported
